Surface pumps of the Ebara trademark (Japan) are characterized by high reliability, compactness and performance. Stainless steel is used for the manufacture of the housing, which significantly reduces the weight of the surface pumps.
Several series of pumps of the Ebara trademark are intended for domestic use. Here are a few of them:
JEU
JEM
2CDXU, 2CDU
DWO
JEU series surface pumps.
They are designed for pumping clean water without abrasive and fibrous inclusions from reservoirs, wells or reservoirs whose depth does not exceed eight meters. They have found their application in the water supply of private homes and farms, as well as in irrigation, maintaining a set pressure level in the water supply network and in air conditioning systems.
Pumps of this series can be used in continuous operation. Their design is monoblock, which not only significantly saves space, but also simplifies maintenance. If necessary, the pump can be repaired with the replacement of the impeller and sealing elements, which does not affect its suction capacity and performance in any way.
In the manufacture of the hydraulic part of the pumps of this series, stainless steel is used in combination with noril, which suggests their high resistance to corrosion.
A distinctive feature is the use of O-rings of a special design, which not only allows you to increase the performance of pumps in this series, but also to use them for pumping hot water.
Productivity ranges from 1.5 to 18 m3 per hour.
Surface pumps of the 2CDXU (2CDU) series.
They are designed for the water supply of private homes and farms, as well as for watering and maintaining the pressure level in the water supply network. The impeller and the hydraulic part of the pump are made of stainless steel, which also allows pumping mildly aggressive liquids whose physical properties are similar to those of water. At the same time, the liquid should not contain fibrous and abrasive inclusions.
They can be used for pumping drinking water. The use of sealing rings of a special design allows you to increase the performance of the pump, as well as to pump hot water.
The pump can be installed in any position (horizontally, vertically, at an angle to the horizon)
The capacity of the pumps in this series (depending on the model) ranges from 2 to 5 hp. The
maximum capacity is from 5.5 to 66 m3 per hour.
Surface pumps of the DWO series.
They can be used for water supply of private homes and farms, as well as pumping liquids from various reservoirs and reservoirs. In this case, the water may contain abrasive inclusions, the linear size of which is not more than 20 mm, which allows the use of pumps of this series for pumping water from kitchen sinks and bathroom drains.
The hydraulic part of the pump and the nozzles are made of stainless steel. The design is monoblock, compact. It can be installed in any position. Bahisbey Kayıt Canlı Destek <br>