How it works: it has its own cryptocurrency reserve, which can be represented as a chain of bitcoins. When you transfer your funds to the Blender io, the resource sends your funds to the end of the chain and sends you new coins from the beginning of the chain that have nothing to do with the old coins. therefore, there can be no connection between incoming and outgoing coins. Only coins that go from your wallet to the Ethereum address can be tracked through the public ledger, but no further. Blender io does not require you to register or provide any information other than the “receiving address“! It does not require identity confirmation and registration, but it is mandatory to provide in addition to the “receiving address”. The additional withdrawal delay feature has been extended to the maximum and offers installation up to 24 times a day. Other servers do not have such a wide range of latencies. Each set of unrefined coins can be split into as many as 8 pieces and sent to different addresses with an additional fee of 0.00008 BTC per address.
Bitcoin Mixer Uni is a simple service that will increase your privacy while using Ethereum and making Ether transactions. Every single person have its right for a personal privacy even when transacting, trading or donating Ether. Due to ethereum blockchain features you are not completely anonymous while using ETH and here comes Ethereum Mixing Service to help you cut all ties between your old and fresh mixed ETH coins. Using Bitcoin Mixer Uni mixer makes almost impossible to trace your new Ethereum Address..Let’s take a look at another one of the leading bitcoin mixers which is incredibly easy to operate. Bitcoin Mixer Uni has a straightforward interface and it is worth mentioning that the service fee is the lowest possible, it is 0.0% with 0.0002 BTC per extra address. Retention period is 7 days when it is easy for a user to manually remove all the logs which are saved for this period because of any future transaction-related problems. There is a time-delay feature, however, it is not possible to be controlled by a user but the mixing platform only.Bitcoin Mixer Uni is one of the most reputable and most user-friendly (in terms of the process and the rate of the fees per transaction) Bitcoin mixing platform available for users right now. It offers a straightforward process and flexible service fees that can be determined by the users themselves, depending on the service that they want.This Bitcoin Mixer Uni also supports Bitcoin and other cryptocurrencies like Ethereum, Bitcoin Cash, and Litecoin bearing no logs policy. It requires a minimum deposit of 0.005 BTC, 0.01 BCH, 0.1 ETH, 1 LTC, and the transaction fee is 0.5% plus 0.0005 for each extra address. It supports multiple addresses of up to 10 and requires confirmation from 1 to 50. No registration is required and it does offer a referral program. Also, it comes with a letter of guarantee.
Pros:
Bitcoin Laundry supports Bitcoin and Litecoin cryptocurrencies bearing no logs policy. It requires a minimum deposit of 0.005 BTC, 0.015 LTC and the transaction fee is from 0.4% to 4% + mining fee 0.0003 for BTC, from 2% to 20% + mining fee 0.0003 for LTC. It supports multiple addresses of up to 5 and requires confirmation from 1 till 6. No registration is required and it does offer a referral program as well as a letter of guarantee.Bitcoin Laundry is being listed at the #1 spot here, well that’s not without substance. The top reasons why I’m in love with this Bitcoin tumbler is because it’s fast, takes care of our anonymity and privacy, and has a very negligible fee. Smartmix bitcoin mixing service The payout is almost instant, all it needs is 2 confirmations for the dirty coins being sent in to be cleaned or tumbled. No account needs to be created to clean your coins either. They have advanced options which let you set “delayed payouts” which further increase your anonymity and make it hard to link the coins going inside to the coins coming out. There’s even an option to add up to 5 addresses, so your coins are broken down into 5 different parts and sent to the different addresses again adding another layer of anonymity. The minimum amount too is pretty low being just 0.001BTC while the maximum limit is 15.32BTC. It’s pocket-friendly as well, with the fee being just 0.5% per mix + 0.0001BTC/address, in fact, it probably is one of the lowest fee in the industry altogether. As for anonymity, they delete all logs related to your mix after 7 days which finally erases the last thread which could ever be linked back to you. So yes, enough reasons to list it at the #1 spot, don’t you agree?Bitcoin Laundry is an extremely basic mixer. It allows only 1 output address to be specified. The UI too is extremely simple and doesn’t feature any sliders or calculators. Users simply enter their output address and receive the funds as simple as that. The minimum mix amount is 0.001BTC while the maximum is 100BTC. Amounts out of these limits will not be mixed. Users have no control on the fee and it’s randomized between 0.5% and 1%. An additional 0.0005 BTC miner fee also exists. The time-delay too (if any) isn’t user controlled and the mixer sends out funds at its own pace. Its working infrastructure seems to differ from other mixers out there. While most other mixers have a “reserve”, this platform seems to use miners. The unclean coins are sent to “miners”, and the clean coins too are claimed to be sent out from “miners”. It however doesn’t keep any logs and all information is deleted once a transaction is complete.Bitcoin Laundry is a Bitcoin mixer that processes Bitcoin and Bitcoin Cash transactions. The site offers a referral program for new users and supports multiple recipient addresses. Transaction fees start at 0.5% plus an extra 0.0001 BTC for each extra address added.
Pros:
Bitcoin Mixer is one of the most pocket-friendly, easy to use and customizable Bitcoin laundry platforms in the industry. The user-interface is extremely simple and clean, anyone who has never before used any such service too can navigate around and tumble Bitcoins easily. No registration is required to mix Bitcoins on Blender.io Its “delay” feature lets you set delays from 1-24 hours which increases your anonymity by providing a gap between the deposited coins and the outgoing ones. As for the fee, it’s dynamic, meaning you get to choose the amount of fee you’d like to pay, the minimum fee being 0.5% and the maximum being 2.5% with an additional 0.0005%/address. It’s also one of the rare platforms which provides you with a mixing code which makes sure your previous coins do not get mixed with your newer deposits if you do multiple deposits to the tumbler. The minimum amount you can mix is 0.001BTC while there’s no specific maximum amount as their Bitcoin reserve seems to be quite large. It also has a No Logs Policy and all data is instantly deleted as soon as a transaction is complete; and as for the number of confirmations required it’s 3 for your deposit to be mixed by Bitcoin Mixer It supports 8 addresses for each mix so you can further increase your anonymity. In a nutshell, it gives you the power to choose, is fast, anonymous and totally worth a try. It also supports Segwit and bech32 Addresses, with some terms attached. For e.g. only witness version bech32 addresses are supported. Similarly, only the addresses starting with the number “3” are supported.Another trustworthy mixer is Bitcoin Mixer which supports two cryptocurrencies with Ethereum to be added soon. The mixing process is quite typical and similar to the processes on other tumblers. It is possible to set a time-delay option up to 72 hours and a sender has an opportunity to split the transaction, so the funds are sent to several addresses. Thus, sender’s funds are more secured and untraceable.Bitcoin Mixer currently only supports Bitcoin mixes, however, it has plans to bring in ETH mixes in the near future. It has been featured on Bitcoin.com/ News BTC/ Crypto News/ The Next Web etc. hence building a bit of trust. Very modern, advanced, user-controlled interface. Allows upto 5 output addresses. Obviously, doesn’t keep any logs whatsoever. The user-control is impressive. You get to control the fund-distribution, as well as the time-delay for each output address manually. Even the fee can be set manually. The cheapest allowed fee is 0.5% which is more than acceptable. The highest is set at 5%. Obviously the 0.25mBTC blockchain transaction fee is attached on top of the selected fee. It even has a “strength meter” which shows how strong your mix is, based on all the factors you’ve selected. No registration required whatsoever. And it does provide the mixing code to ensure all outputs are fresh and not linked to any of your previous deposits.Being honest, this isn’t the most feature-rich or control-rich Bitcoin Mixer mixer that’s available out there. However, it still averages mixes over 700Bitcoin/day (claimed, not verified). The coins are claimed to be sourced from mining pools in the U.S, China and Europe. Obviously they do not keep any logs. Unfortunately, only 1 output address is allowed which is a bit of a downer. The time-delay can fully be set manually. It can be as low as 0 hours, or as high as 48 hours. Any other delay between this frame can be set using the provided slider. The fee isn’t randomized, neither is it user-controlled. It’s set at a solid 0.1% for all transactions. Accepts a minimum Bitcoin deposit of 0.010BTC. Maximum funds which can be currently mixed stand at 677 BTC. Number of required confirmations depend on the amount. Only 1 is required for mixes below 2.5BTC. For 25 BTC it needs 3 confirmations. 4 confirmations for 40BTC and 5 confirmations for 50 BTC are required respectively. Doesn’t require registrations.
Pros:
Let’s take a look at another one of the leading bitcoin mixers which is incredibly easy to operate. Tumbler has a straightforward interface and it is worth mentioning that the service fee is the lowest possible, it is 0.0% with 0.0002 BTC per extra address. Retention period is 7 days when it is easy for a user to manually remove all the logs which are saved for this period because of any future transaction-related problems. There is a time-delay feature, however, it is not possible to be controlled by a user but the mixing platform only.Tumbler is one of those mixing services that keep your crypto safe. The platform will take your bitcoin, mix it with other deposits, and give you the same amount of bitcoin in return. It’s designed to reduce bitcoin tracking, “clean” your coins, and help ensure anonymity on the transparent bitcoin network. A bitcoin mixer service like BitMix.Biz will take your bitcoin, then give you different bitcoin in return. The platform collects everyone’s bitcoin deposits, mixes them up into one central account, and then returns the bitcoins to users. You get the same amount of bitcoin (minus a fee), but different bitcoin from different parts of the blockchain. With BitMix.Biz, you get a letter of guarantee. That letter of guarantee is proof of BitMix.Biz’s obligations. When they give you their bitcoin address, they’ll provide a digitally-signed confirmation that this address has genuinely been generated by the server. That letter is always signed from the BitMix.Biz main bitcoin account (that account is publicly available on BitMix.Biz). The platform also uses a special 12 symbol “code” to ensure you get your bitcoin back every time you use the service. You save that code. That code also 100% excludes you from receiving your own coins anytime in the future. With Tumbler you will get: Fully Anonymity After your order is invalid, BitMix.Biz will remove any information about your transactions. Absolutely no logs or personality identifying information is kept regarding your use of the BitMix.Biz service. Instant Transfer Money is instantly transferred to your address after your transaction is confirmed. Partner Program Tumbler pays users when they refer others to the platform. They’ll pay for every transaction made by an invited user. The platform charges a mining fee of 0.4 to 4%. You can set the fee manually when you’re mixing your bitcoins. The address fee is 0.0005 BTC per output address to cover any transaction fees charged by miners. BitMix.Biz’s mixing process takes up to 24 hours, although it’s usually “almost instant” depending on the current service load. You’re required to mix a minimum of 0.007 BTC and a maximum of 1000 BTC. Transactions outside this range will not be accepted.Tumbler is an extremely basic mixer. It allows only 1 output address to be specified. The UI too is extremely simple and doesn’t feature any sliders or calculators. Users simply enter their output address and receive the funds as simple as that. The minimum mix amount is 0.001BTC while the maximum is 100BTC. Amounts out of these limits will not be mixed. Users have no control on the fee and it’s randomized between 0.5% and 1%. An additional 0.0005 BTC miner fee also exists. The time-delay too (if any) isn’t user controlled and the mixer sends out funds at its own pace. Its working infrastructure seems to differ from other mixers out there. While most other mixers have a “reserve”, this platform seems to use miners. The unclean coins are sent to “miners”, and the clean coins too are claimed to be sent out from “miners”. It however doesn’t keep any logs and all information is deleted once a transaction is complete.Tumbler supports Bitcoin and Litecoin cryptocurrencies bearing no logs policy. It requires a minimum deposit of 0.005 BTC, 0.015 LTC and the transaction fee is from 0.4% to 4% + mining fee 0.0003 for BTC, from 2% to 20% + mining fee 0.0003 for LTC. It supports multiple addresses of up to 5 and requires confirmation from 1 till 6. No registration is required and it does offer a referral program as well as a letter of guarantee.
Pros:
As well as others, Mixero has both a clear-web CryptoMixer. This mixing service is notable for accommodating extremely large-volume transactions. After public verification of their reserve of 2000 BTC there is no doubt that users can trust this mixing service and their cryprocurrencies will not be taken. The number of needed confirmations differs depending on the deposited amount, e.g. for depositing less that 25 BTC there is only 1 confirmation needed, in case of sending more than 1000 BTC a user needs to gather 5 confirmations. To use this platform, a Mixero code needs to be created. A user should note it, so it is easy to use it next time. After entering a CryptoMixer code, users need to provide the output address or several of them and then set a time-delay feature. A delay time is determined automatically and a user can modify it if needed. A service fee can be also selected from the table depending on the sent sum. Each transaction requires additional fee of 0.0005 BTC. Also, a calculator on the main page helps every user to see the amount of crypto money sent and got back after mixing.Mixero only supports Bitcoin transactions and requires customers to deposit a minimum of 0.001 BTC. Transaction fees range from 0.5 to 3% depending on the amount that is being transferred. This Bitcoin mixer supports multiple addresses and custom options (max of 10). Nonetheless, confirmation is required. Mixero does not have a referral program in place.Mixero works by removing the link between your old and current addresses. Since the mixer destroys any connection between them, your traces of transactions and your identity become untraceable. The main advantage is the low commission. Bitcoin Laundry is a donation platform. They charge no service fees, only a transaction fee of 0.0002 BTC to the exit address, while transactions from 0.0005 to 38 BTC are supported. You can set 5 addresses and specify what percentage of the total amount will be returned to each address. You can select predefined or random payment delays for each address, making it even more difficult to track the transaction. Bitcoin Laundry boasts a “no log” retention period policy and also allows users to manually delete logs with just one click if they wish.This Mixero also supports Bitcoin and other cryptocurrencies like Ethereum, Bitcoin Cash, and Litecoin bearing no logs policy. It requires a minimum deposit of 0.005 BTC, 0.01 BCH, 0.1 ETH, 1 LTC, and the transaction fee is 0.5% plus 0.0005 for each extra address. It supports multiple addresses of up to 10 and requires confirmation from 1 to 50. No registration is required and it does offer a referral program. Also, it comes with a letter of guarantee.
Pros:
